Presonus Sceptre S6 6.5-Inch Studio Monitor

Description

The first time you hear Sceptre-series CoActual� 2-way studio monitors, you�ll discover fine nuances of your music that can�t be reproduced by conventional designs. The Sceptre�s panoramic soundstage, fine detail, and stunning dynamics will astonish you.

The coaxial conundrum.
??Coaxial designs offer the advantages of a single point source for a consistent acoustic center and a symmetrical dispersion pattern. But designing coaxial systems without acoustic anomalies has been extremely expensive�until now.

The magic of TQ.
Each Sceptre monitor contains a DSP chip that enables the use of Fulcrum Acoustic�s TQ algorithms. The result is speakers that deliver the full benefits of coaxial design.

Monitors you can customize.
Sceptres provide extensive user-adjustable contour features that let you optimize the monitors for any mixing space.

Big woof or huge woof
The Sceptre series includes two models with the same high/mid coaxial section. The S6 delivers far better bass response than you�d expect for its size.

Presonus Sceptre S6 6.5-Inch Studio Monitor Features:
CoActual technology

• Combines DSP time-correction and point-source design for symmetrical soundstage and micro-definition imaging
• Unique coaxial transducer integrates 6.5-inch midrange driver and 1-inch (25 mm), horn-loaded HF transducer with Coaxial Speaker Coherence Alignment
• Powerful DSP provides critical Temporal Equalization� with multiple FIR filters

Acoustic-tuning controls

• HF Driver Adjust (0 dB, +1 dB, -1.5 dB, -4 dB)
• Acoustic Space settings (0 dB, -1.5 dB, -3 dB, -6 dB)
• High-pass filter (Off, 60 Hz, 80 Hz, and 100 Hz, -24 dB/octave slope)
• Sensitivity (+4 dBu to -10 dBV)

Power and safety

• 180W RMS, Class D biamplification with internal heat sink
• 102 dB maximum continuous SPL
• RF shielding, current-output limiting, and over-temperature protection
• Amplifier �soft start� feature eliminates popping on power-up
• Internal power supply with IEC connector
• Power switch with on/off LED

Inputs and outputs

• Balanced XLR and �-inch TRS line-level inputs with A-taper level control

Presonus Sceptre S6 6.5-Inch Studio Monitor Specifications:
Inputs

• 1- Balanced XLR
• 1- Balanced �� TRS

Performance

• Frequency Response (-3 dB) 52 Hz � 20 kHz
• Frequency Response (-10 dB) 42 Hz � 23 kHz
• Crossover Frequency 2.2 kHz
• LF Amplifier Power (@ 4?) 90W
• HF Amplifier Power (@ 4?) 90W
• Peak SPL (@ 1 meter) 109 dB
• LF Driver 6.25� glass-reinforced paper
• HF Driver 1� diaphragm compression driver
• Input Impedance 10 k?

User Controls

• Volume Range A-type taper A-type taper
• HF Control Flat, +1, -1.5, -4 dB
• Flat, +1, -1.5, -4 dB
• Low Cut Flat, 60, 80 Hz, 100 Hz
• Acoustic Space Flat, -1.5, -3, -6 dB

Protection

• RF interference
• Over-current
• Over-voltage
• Over-temperature
• Turn-on/off transient
• Subsonic filter
• External mains fuse

Power

• 100-120V ~50/60 Hz or 220-240V ~50/60 Hz

Cabinet

• Vinyl-laminated, medium-density fiberboard

Physical

• Width 9� (230 mm)
• Depth 12.2� (310 mm)
• Height 13.2� (335 mm)
• Weight 18.8 lbs (8.53 kg)